Aluminum Content 4 X 8 Plate Sheets 7A04
Aluminum Content 4 X 8 Plate Sheets 7A04:7A04 Aluminum Content 4 X 8 Plate Sheets :7A04 aluminum plate belongs to the Al-Zn-Mg-Cu series ultra-high strength aluminum alloy, also known as ultra-hard aluminum. It is a relatively mature and widely used alloy in ultra-hard aluminum. It is a good aluminum material for aerospace.7A04 Aluminum Content 4 X 8 Plate Sheets is quite mature in super-duralumin and is an alloy that has been used for a long time and is widely used. It has the advantages of high strength and good heat treatment strengthening effect, moderate plasticity in annealed and newly quenched states. Different from duralumin, the corrosion resistance in the artificial aging state is better than that in the natural aging state, and the natural aging process is slow, and it takes 3 months to reach the peak ageing hardening, so 7A04 is used in the quenching artificial aging state.
The strength of 7A04 aluminum plate is higher than that of hard aluminum. It is characterized by its yield strength close to tensile strength and plasticity, and its sensitivity to stress concentration is strong, especially when subjected to vibration load and repeated static load. Therefore, the design of parts, the manufacturing process and the assembly process need to strictly avoid the stress concentration and the formation of additional stress. The heat resistance of the alloy is poor, and it will soften rapidly when the temperature is higher than 125.
Chemicai Composition(WT%) | |||||||||
Grade | (Si) | (Cu) | (Mg) | (Zn) | (Mn) | (Ti) | (Cr) | Fe | (Al) |
7A04 | ≤0.5 | 1.4-2.0 | 1.8-2.8 | 5.0-7.0 | 0.2-0.6 | ≤0.1 | 0.15-0.25 | ≤0.5 | Balance |
Mechanical Properties | |||||||||
Temper | Tensile Strength(N/M ㎡) | El(%) | |||||||
7A04 T6(thickness 1.0-2.5mm) | 480Mpa | 7% | |||||||
Application | |||||||||
7A04 aluminum alloy plate is widely used in aviation fixtures, trucks, tower buildings, marine aluminum plates, pipelines, etc. need to have strength, weldability, and corrosion resistance in buildings. Such as aircraft parts, gears and shafts, fuse parts, instrument inlet shafts and gears, missile parts, turbines, keys, beams and stringers, bulkheads, ribs, skin, joints, undercarriage parts etc. It can produce all kinds of semi-finished products, such as plate, strip, section, bar, wall, pipe, wire, free forgings and die forgings.
The advantages of 7A04 aluminum plate used in aircraft aluminum plates are to reduce aircraft fuel consumption, increase aircraft flight speed, increase loading capacity and reduce aircraft weight. |
1.Packing: In bundle with steel strip or packed in wooden pallets or as customers requirement.
2.Trade terms: FOB/CIF
3.Port of Loading: Shanghai/Ningbo/Guangzhou
4.Shipment:
5.Length: <6m, loaded in 20GP container (inside: 5690*2150*2190mm)
6.Length: <12m, loaded in 40GP container (inside: 11890*2150*2190mm)
7.Delivery time: Normal size: 3-7 days send from warehouse directly; Special size: 10-20 days customized for you.
1. Can you cut the materials into small sizes?
Yes,we can do it to meet you need.
2.: What's your minimum order quantity (MOQ)?
We accept small orders,a small amount of samples is ok.
3.Can you provide sample?
Yes, we can provide you sample, but you need to pay for the sample and freight firstly.We will return the sample fee after you make an order.
4.Can you provide Certificates for aluminum materials ?
Yes,we can.
5.What’s the delivery time for orders?
Normally it takes 2-7 working days, or mutual agreement.