Aluminum sheet 1060
1060 aluminum sheet belongs to pure aluminum and the purity is 99.6% aluminum. 1060 aluminum sheet contains 0.05% cooper, its conductivity is 55%. Besides, 1060 aluminum sheet is relatively low strength, essentially pure aluminum alloy with many different tempers, such as O (annealed), H12, H14, H16, H18, etc. What’s more, other aluminum sheet belonging to commercial pure wrought family are available, including 1050, 1070, 1100 and so on.
1060 aluminium sheet with high plasticity, corrosion resistance, conductivity and thermal conductivity, but its strength is low, heat treatment can not be strengthened, and its machinability is not good; it can be welded by gas, hydrogen atom and contact welding, and it is not easy to braze; it is easy to withstand all kinds of pressure processing, extension and bending.
| Chemicai Composition(WT%) | |||||||||
| Grade | (Si) | (Cu) | (Mg) | (Zn) | (Mn) | (Ti) | (V) | Fe | (Al) |
| 1060 | ≤0.25 | ≤0.05 | ≤0.03 | ≤0.05 | ≤0.03 | ≤0.03 | ≤0.05 | ≤0.35 | 99.6 |
| Mechanical Properties | |||||||||
| Density | El(%) | Tensile Strength(N/M ㎡) | |||||||
| 2.71 g/cm³ | 3-5% | 3-5%110-136 Mpa | |||||||
| Difference between Aluminum Sheet 1060 H14 and 1060 H24 | |||||||||
| H for the hard state.
1060 H14 means no heat treatment, but only work hardening to give the material a tensile strength intermediate between 0 (annealed) and 8 (hard state), i.e., the mean value. 1060 H24 in the H said processing hardening state, H24 said control hardness and other physical properties of the processing process, this is the semi-hard state. |
|||||||||
1060 aluminum sheet is widely used in products which do not require high strength. Products are often used for signs, billboards, building decoration, bus body, high-rise buildings and factory wall decoration, kitchen sinks, lamp holders, fan leaves, electronic parts, chemical instruments, sheet processing parts, deep drawing or spinning concave utensils, welding parts, heat exchangers, clock surfaces and panels, nameplates, kitchenware, decorations, reflective appliances, etc.
1060 aluminum sheet mainly mill finish, with blue PE films or paper-interleaved. This alloy can’t make the heat treatment and the main temper are H24, H14, also can be produced with fully annealed and be soft temper. 1060 aluminum sheet can also be wildly used for producing aluminum circles and discs which is very soft and good for spinning and deep drawing.
1.Can I get samples before order ?
Yes, of course. Usually our samples are free,we can produce by your samples or technical drawings.
2.Can I go to your factory to visit?
Of course, we welcome customers from all over the world to visit our factory.
3.How can I get a quotation from you ?
You can send inquiry to us, and we will reply every inquiry in time.
4.What product information do I need to provide?
You need to provide the grade, width, thickness, coating and the number of tons you need to purchase.
5.Does the product have quality inspection before loading?
Of course, all our products are strictly tested for quality before packaging, and unqualified products will be destroyed.we accept the third party inspection absolutely.
